Choosing between these two industrial valves means deciding how much control you want to hand over to a machine. One is a manual stainless steel ball valve that sells for $12.09. The other is an ASCO solenoid valve at $95.55 that switches automatically when it receives 120VAC. The price difference is dramatic, but the two serve different purposes: manual shutoff versus automated flow switching.
Quick Verdict
If you need a simple, corrosion-resistant valve for water, oil, or gas and you're willing to operate it by hand, the stainless ball valve is the easy pick. If you need a valve that opens and closes from an electrical signal and your system runs at low pressure, the ASCO solenoid valve is the one that can do that job.
Comparison Table
| Feature | 1-1/4-inch Stainless Ball Valve | ASCO 8215C83 Solenoid Valve |
|---|---|---|
| Relative cost | USD 12.09 | USD 95.55 |
| Pipe size | 1-1/4-inch NPT | 2-inch NPT |
| Valve type | Full-port ball valve | 2-way normally open solenoid |
| Operation | Manual lever | 120VAC solenoid |
| Pressure range | 1000 WOG | 0-25 PSI |
| Condition | New | New open box |
In the table, the cost bars make the price gap obvious: the ball valve is roughly one-eighth the price of the solenoid valve. That gap mirrors the difference between a straight manual component and an electrically operated one.
Where Each Product Wins
- 1-1/4-inch Stainless Ball Valve: Wins on cost and pressure handling.
- ASCO 8215C83 Solenoid Valve: Wins on automation and line size.
Product Notes
1-1/4-inch Stainless Ball Valve
This valve adds a solid 1-1/4-inch shutoff point to a system handling water, oil, or gas. The 316 stainless steel body and ball provide strong corrosion resistance, and the PTFE seals are designed to extend the valve's service life. Because it's a full-port ball valve, the opening matches the pipe size, which keeps flow restriction low when the valve is open. The heavy-duty handle with blue vinyl insulation gives you a comfortable grip for manual operation. The limitations are clear: it only works by hand, so there's no way to automate it, and it's built for higher-pressure service (1000 WOG) rather than low-pressure solenoid-type applications. If you need a dependable shutoff valve and don't require electrical control, this manual ball valve is a practical buy.
ASCO 8215C83 Solenoid Valve
The ASCO valve exists for a different job: automatic, electrical control of a 2-inch line. It's a 2-way normally open solenoid valve rated at 0-25 PSI, so it's intended for low-pressure systems where a valve needs to switch on and off from a control circuit. The 120VAC coil fits many industrial control systems, and the MPN 8215C83 provides a specific part reference. This unit is sold as new open box, meaning the packaging may have been opened even though the valve is new. A key limitation is the low pressure range-if your line operates above 25 PSI, this valve won't work for you. There's also no manual lever, so once power is applied, the solenoid handles the switching. This is the right choice when you need automated flow in a low-pressure 2-inch pipe.
Final Choice by Use Case
Choose the stainless ball valve for manual shutoff on water, oil, or gas lines where you need a corrosion-resistant and high-pressure-capable valve. Choose the ASCO solenoid valve for automated flow switching in a low-pressure system with a 120VAC control circuit.
