Choosing between a propane hose and a compressor hose may seem like an odd matchup, but in the world of hoses, tubing, and fittings, you often pick between two tools built for entirely different tasks. That's the situation here: one is a long LPG/natural gas line, the other a short high-temperature compressor jumper.
Quick Verdict
If you need to run propane or natural gas across a distance, the LPG hose is the obvious choice. If you need a compact, heat-resistant jumper between an air compressor and a nearby filter, regulator, or air tank, go with the compressor hose.
At a Glance
| Product | Price | Condition | Length | Material | Best For |
|---|---|---|---|---|---|
| 40' 3/4" ID Industrial Propane / Natural Gas Hose (LPG) | $60.00 | Used | 40 ft | PVC | Propane/natural gas delivery |
| 1/2" NPT Male x 20" Long 750°F 450PSI Industrial Compressor Stainless Steel Hose | $29.69 | New | 20 in | Stainless steel | Compressor jumper connections |
Where Each Hose Wins
The propane/natural gas hose wins when you need to get gas from a large supply to a distant point of use. The wide-diameter, long-reach design means fewer connections and less need for extension pieces. The compressor hose wins when you need a compact, vibration-absorbing jumper right at the compressor, with the heat tolerance to stay put in a hot environment.
Product Notes
40' 3/4" ID Industrial Propane / Natural Gas Hose (LPG)
This is the long-distance workhorse. At 40 feet long with a 3/4-inch internal diameter, it can carry propane, natural gas, or LPG from a tank or supply line to where it's needed. The Enerco TruZero branding points to US origins, and the hose is designed for LPG transfer. The trade-off is condition: this is a used hose sold as is. The product photo shows one of a group, so the exact unit you get may look different. It's still a workable option at $60 if you need a lot of hose for the job.
1/2" NPT Male x 20" Long 750°F 450PSI Industrial Compressor Stainless Steel Hose
This is a new, purpose-built jumper hose. The 1/2-inch NPT male connectors on both ends screw into a filter regulator, air tank, or other compressor piping, and the 20-inch length fits tight spaces. The two-layer stainless steel construction, with a braided exterior and corrugated inner core, handles vibration and corrosion, with a temperature range of -50°F to 750°F and a pressure rating of 450 PSI. It's a high-heat, high-pressure solution for a very specific connection. The limitation is that it's not a general-purpose hose; the fixed 1/2-inch NPT fittings require matching female threads, and the short length won't reach across a room.
Final Choice by Use Case
Go with the propane/natural gas hose when your main concern is moving gas over distance from a tank or supply line. Its long, wide body does exactly that, and the used condition is the trade-off for the reach.
Go with the compressor hose when you need a clean, heat-resistant connection between an air compressor and the equipment right next to it. It's new, compact, and rated for the temperatures and pressures that compressors produce.
