Choosing between these two industrial valves comes down to whether you need electrically controlled flow or a larger ball valve. The ASCO 8215C83 is a solenoid model for automated on/off work, while the Spears 1822-030 is a socket ball valve. They're close in price, but their connection styles and operating principles put them in different jobs.
Quick Verdict
If you need solenoid actuation on a 120VAC circuit, the ASCO 8215C83 is the valve to get. If you need a larger-diameter valve for water service and want a higher pressure rating, the Spears 1822-030 makes more sense. The price gap is only about $4.40, so let the connection type and valve operation drive your decision instead of cost.
Comparison
| ASCO 8215C83 | Spears 1822-030 | |
|---|---|---|
| Price | $95.55 | $99.95 |
| Valve type | 2-way N.O. solenoid valve | Industrial ball valve |
| Connection | 2" NPT | 3" socket |
| Pressure range | 0-25 PSI | 235 PSI |
| Country of origin | Mexico | United States |
| Price bar |
Both valves are new open-box items, so you're getting a new component without the original retail box. That's worth keeping in mind as you plan around the connection and control requirements.
Where Each Product Wins
- ASCO wins when you need a valve that can be cycled by a solenoid from your automation setup; it's the one to build around if your control signal is electric rather than manual.
- Spears wins when you don't need automated electrical operation; the valve's higher rating and water-focused build give it an edge for that kind of service.
Product Notes
NEW ASCO 8215C83 120/60 120VAC 2" NPT 2-WAY NO INDUSTRIAL SOLENOID VALVE 0-25PSI
The strongest reason to choose the ASCO is its solenoid operation: it runs on 120VAC at 60Hz, so it can be wired directly into a standard control circuit for automated on/off flow. It's a 2-way normally open valve, and the open-box unit comes without the original packaging but is described as new. The main limitation is the working range-this valve is intended for low-pressure service, so it won't fit a line that sees pressure above 25 PSI. If your system stays in that zone and you need electrical actuation, this is the practical pick. That combination makes it a strong fit for a system that needs repeatable on/off switching.
Spears Industrial Ball Valve Socket 3" PVC 1822-030 EPDM O-Ring 235 psi
The Spears stands out for its water-ready construction and higher pressure ceiling. The EPDM O-ring and PVC body point to water service, and this unit was made in the United States. The limitation is that it's a ball valve, not a solenoid valve, so it doesn't offer automated electrical operation on its own; you'll need to turn it manually or add an actuator. The valve itself is the only item included, with no fittings or accessories in the box. That makes it a solid choice when your valve doesn't need to be automated.
Final Choice by Use Case
Choose the ASCO if you need a normally open solenoid valve with a 2-inch NPT connection. Choose the Spears if you need a 3-inch socket connection. The right call depends on the pipe connection and control method you already have in place.
