When your pneumatic system calls for a double-acting air cylinder, the first question is usually dimensional: do you build around imperial or metric components? The Bimba M-0410-DPY and the MECCANIXITY 25mm x 150mm are both single-rod, double-acting cylinders powered by compressed air, but their bore sizes, stroke lengths, and prices point to different projects.
Quick verdict
Reach for the Bimba M-0410-DPY if your application expects a 3/4" bore, a 10-inch stroke, and a cylinder built in the United States. Choose the MECCANIXITY 25mm unit if your build uses metric dimensions, you want a 150mm stroke, and the lower listed price fits your project budget.
Comparison at a glance
| Feature | Bimba M-0410-DPY | MECCANIXITY 25mm x 150mm |
|---|---|---|
| Listed price | USD 39.99 | USD 33.99 |
| Bore | 3/4 in | 25mm |
| Stroke | 10 in | 150mm |
| Action | Double-acting | Double-acting |
| Cylinder type | Single-rod cylinder | Single-rod cylinder |
| Condition | New - open box | New |
| Country of Origin | United States | China |
Where the Bimba M-0410-DPY wins
The Bimba is the only cylinder here with a 3/4-inch bore and a 10-inch stroke, so it fits an imperial-sized automation or rigging setup. It's listed as double-acting and single-rod, and its cylinder construction comes from a United States origin. The open-box condition means it's new but without original packaging - a detail to keep in mind if unopened packaging matters to you.
Where the MECCANIXITY wins
The MECCANIXITY offers a 25mm bore and 150mm stroke, which lines up with metric stroke and bore dimensions. It's listed as new, not open-box, and its listed price of USD 33.99 is lower than the Bimba's USD 39.99. It also carries a specific maximum pressure rating of 1.0 MPa, a concrete number for systems that specify pressure in megapascals.
Product notes
Bimba M-0410-DPY Double Acting Pneumatic Air Cylinder 3/4" Bore 10" Stroke New
This Bimba cylinder pairs a 3/4-inch bore with a 10-inch stroke in a double-acting, single-rod layout. It is listed as new in open-box condition. The United States origin and the inch-based bore and stroke give you a clear imperial alternative to the metric unit. On the other hand, the listed price is the higher of the two in this comparison, and the 10-inch stroke won't directly match a metric 150mm travel length.
25mm Bore 150mm Stroke Double Action Pneumatic Air Cylinder MECCANIXITY
The MECCANIXITY cylinder brings a 25mm bore and 150mm stroke to a double-acting, single-rod design. It is listed as new and carries a rated maximum pressure of 1.0 MPa. Its listed price of USD 33.99 is lower than the Bimba's USD 39.99. The trade-off is that all dimensions are metric, so this is the metric-focused option in this comparison.
Final choice by use case
Pick the Bimba M-0410-DPY when you need a 3/4-inch bore, a 10-inch stroke, and a cylinder made in the United States, and you're comfortable with an open-box condition. Pick the MECCANIXITY 25mm when your project runs on metric dimensions, you want a 150mm stroke, and the lower listed price fits your project budget.
