Shopping for industrial valves often starts with a fork in the road: do you need a valve that can be controlled as part of a process system, or do you need a dependable manual shutoff for a line? The two valves here sit on opposite sides of that split. On one side is a used Burkert process actuator control valve listed at $159.99. On the other is a new ball valve option listed at $16.59. The price gap is wide, but the more important difference is the job each one is built to do.
Quick verdict
If your priority is automated process control in an actuated valve arrangement, the Burkert process actuator control valve is the one to evaluate. If you need a shutoff valve, the ball valve is the straightforward choice. Matching the valve to the operating style matters more than the price gap.
Comparison
| Product | Listed price | Condition | Key focus |
|---|---|---|---|
| Burkert Process Actuator Control Valve | USD 159.99 | Used | Actuator control valve for process use |
| 1 inch 1" Ball Valve,316 Stainless Steel Full Port,2-Piece, 1000WOG, 2Pack | USD 16.59 | New | Manual lever ball valve with stainless steel construction, PTFE seals, NPT threading, and liquid/gas service |
Where each product wins
The Burkert process actuator control valve wins when your setup calls for an actuated control valve in a process line and you are comfortable with a used component that shows shelf wear. The actuator-control role is the deciding factor, not the price.
The ball valve wins when you want shutoff valves for direct isolation duty. It is the practical choice for straightforward isolation jobs.
Product notes
Burkert Process Actuator Control Valve
Start here if your flow loop needs a process actuator control valve rather than a hand-operated valve. This used unit came from a dairy factory parts warehouse; it is in good condition but shows shelf-age wear and is dirty and dusty from storage. It is sold as found, so you are accepting the visible handling marks as part of the deal. The actuator-control style is the reason to choose it over a manual ball valve. The limitation is the used condition: you are not getting a new, sealed product, and the cosmetic wear means you should inspect the valve carefully for your application.
1 inch 1" Ball Valve,316 Stainless Steel Full Port,2-Piece, 1000WOG, 2Pack
The manual lever design is the main reason to pick this set: it includes two new 1-inch full-port ball valves with a 316 stainless steel body and ball, PTFE seals, and NPT threaded connections. It is positioned for liquids and gases, with a 1000 WOG rating, so it suits manual shutoff duty. The full-port bore and stainless construction support good flow and corrosion resistance. The limitation is the operating style: this is a manual valve, so it cannot be actuated by a process controller on its own. It also comes as a 2-pack with a single size, 1-inch.
Final choice by use case
Choose the Burkert process actuator control valve when your priority is process control for an actuated line and you can work with a used unit that has storage wear. Choose the ball valve when you need shutoff valves for direct isolation. The final call is less about the price spread and more about whether the job is automated process control or direct on/off isolation.
