If you're shopping for industrial valves, the first fork in the road is usually condition versus cost. Do you stretch for a higher-condition option or save with a valve that has been sitting in storage? This head-to-head puts the Burkert process actuator control valve alongside the Powers Process Flowrite II control valve so you can see what the price gap buys.
Quick verdict
Choose the Burkert if your priority is low upfront cost and you can tolerate storage wear. Choose the Powers valve if you want stronger condition and need a specific model. If you need that certainty, the higher price is the trade-off.
At a glance
| Valve | Listed price | Condition | Key details |
|---|---|---|---|
| Burkert Process Actuator Control Valve | USD 159.99 | Used | Process actuator control valve; Germany; shelf-age wear, dirty and dusty from storage |
| NEW Powers Process 593SS075SSCS460S Flowrite II Control Valve Single Seat 3/4 | USD 2,595.00 | New - Open box | Single-seat 3/4 Flowrite II; model 593SS075SSCS460S; UPC 686408405274 |
Where the Burkert wins
The Burkert wins on initial price. Its listed price is the lower of the two, leaving most of your budget intact for fittings, labor, or other components. It is a Burkert process actuator valve from Germany, but its condition shows shelf-age wear, dirt, and dust from storage. If you don't mind a valve that may need cleaning and your system isn't sensitive to cosmetic age, this is the low-cash-outlay route.
Where the Powers wins
The Powers wins for condition confidence and model specificity. It is priced well above the used unit, so it's for buyers who need a specific replacement and want to minimize uncertainty about how the valve was handled. The exact model is identified, and you are not buying something that has been sitting on a shelf for years. If exact model matching matters more than upfront savings, this is the direction to go.
Product notes
Burkert Process Actuator Control Valve
The used Burkert starts the conversation with a very approachable price tag: USD 159.99. It is a process actuator control valve from Germany, and the condition is used. Shelf-age wear, dust, and dirt from storage are part of the deal, and it came from a dairy factory parts warehouse as found. That's the central limitation: you're accepting a used part that has spent time on a shelf, so cleaning and a close inspection should be part of your plan. The reason to pick it is straightforward: for a project that needs an industrial valve and can work with used condition, this price leaves you room in the budget for everything else.
NEW Powers Process 593SS075SSCS460S Flowrite II Control Valve Single Seat 3/4
The Powers Process valve takes the opposite approach at USD 2,595.00. It is new in an opened factory box, so you are not getting used parts or storage residue. The model number is spelled out: 593SS075SSCS460S, a Flowrite II control valve with the single-seat variant, and it carries UPC 686408405274. That makes it the stronger choice when you need a specific replacement and want a new-open-box part. The limitation is the price: it costs about $2,435 more than the Burkert, so you have to need the exact Flowrite II model and the new-open-box condition to justify the jump. If your spec calls for this valve, this is the one to buy.
Final choice by use case
Choose the Burkert process actuator control valve when your main goal is keeping the initial spend low and you can work around storage wear. Choose the Powers Process Flowrite II control valve when the exact model and specific single-seat variant matter more than the price difference. If you're flexible on model and condition, the Burkert is the practical pick. If you need the specific Powers valve, the higher price buys the condition certainty you're after.
