Quick Take
From a $39 ball valve to a $129 stainless steel spare, these four industrial valves cover manual shutoff, throttling, automatic solenoid control, and specialty replacement duty. The key is matching the right valve type to your line size, pressure, and operation needs. A ball valve gives you quick quarter-turn shutoff. A globe valve lets you throttle and regulate. A solenoid valve adds electrical automation. And a 316L spare fills a specific material and sizing niche.
Price Comparison
| Product | Listed Price | Price Bar |
|---|---|---|
| INDUSTRIAL SPARE DN 13 316L Valve | USD 129.00 | |
| NEW ASCO 8215C83 2" NPT Solenoid Valve | USD 95.55 | |
| KITZ 1" Bronze Globe Valve | USD 39.99 | |
| FNW Fig 321A 3/4" Ball Valve | USD 39.00 |
The FNW and KITZ options sit at the low end, while the ASCO is roughly in the middle and the INDUSTRIAL SPARE is the highest-priced entry.
Decision Matrix
| Use Case | Recommended Product | Why It Works |
|---|---|---|
| Manual shutoff for a 3/4-inch line | FNW Fig 321A 3/4" Ball Valve | Three-piece body, manual lever, 150 WSP rating, FPT ends |
| Throttling flow in a 1-inch line | KITZ 1" Bronze Globe Valve | Globe design for regulation, handwheel, 200 WOG rating, threaded FNPT |
| Automatic on/off control for a 2-inch line | NEW ASCO 8215C83 Solenoid Valve | 120VAC coil, 2-inch NPT, normally open, 0-25 PSI |
| Specialty DN 13 316L replacement | INDUSTRIAL SPARE DN 13 316L Valve | 316L stainless steel, metric DN 13 size |
Product Notes
FNW Fig 321A 3/4" Carbon Steel Ball Valve
The FNW Fig 321A is a 3/4-inch carbon steel ball valve with a manual lever and a three-piece body. It carries a 150 WSP pressure marking and FPT end connections, so it fits into 3/4-inch female-threaded piping. It is the lowest-priced valve in this group, which makes it an easy pick for straightforward on/off service. The limitation is its narrow application window: the 3/4-inch size and 150 WSP rating keep it in light-duty territory. There is no automated actuator, and the fixed FPT threads mean you need a compatible line or adapters.
KITZ 1" Bronze Globe Valve
This KITZ globe valve is built for throttling and flow regulation, not just shutoff. The 1-inch size and threaded female NPT connections fit standard 1-inch piping, and the 200 WOG rating is a solid pressure specification for a manual valve. It is priced very close to the FNW ball valve, so the cost difference is minimal. The handwheel gives you fine manual control. The main limitation is that there is no solenoid or actuator, so every adjustment requires getting to the valve and turning it by hand. That makes it a poor fit for remote or automated systems.
NEW ASCO 8215C83 120/60 120VAC 2" NPT 2-WAY NO INDUSTRIAL SOLENOID VALVE 0-25PSI
The ASCO is the only electrically operated valve in this comparison. Its 120VAC solenoid coil makes it a fit for automated systems, and the 2-inch NPT connection is the largest port in the group. The "NO" designation means it is normally open, so the valve passes flow until the coil is energized. The 0-25 PSI pressure range defines where it can work. Its price slots between the low-end manual valves and the 316L spare. The limitation is that you need a 120VAC control circuit, and the low-pressure range plus large 2-inch size limit it to specific low-pressure oversized lines.
INDUSTRIAL SPARE DN 13 316L VALVE NSNP
The INDUSTRIAL SPARE valve is the highest-priced item here, and it stands out for its 316L stainless steel material and metric DN 13 size. While the other valves use inch-based NPT connections, this one is specified in metric DN 13, which points to a different piping standard. If you need a 316L spare part in that specific size, this is the only option in the group that matches. The limitation is the cost: it is the most expensive valve in this lineup, so it makes sense only when the material and metric sizing are required. The part is listed in new open-box condition.
Final Recommendation
For most manual shutoff and throttling jobs, the FNW ball valve and KITZ globe valve deliver the lowest price point in this comparison. Choose the FNW if you need quick quarter-turn operation with a manual lever. Choose the KITZ if you prefer a handwheel for fine flow regulation. Choose the ASCO solenoid valve if you need electrically operated on/off control. Choose the INDUSTRIAL SPARE if your application calls for a 316L stainless steel replacement with metric sizing.
