Shopping for hydraulic hardware often comes down to one question: are you trying to move fluid through a system, or move a load with a cylinder? These two components address different halves of that problem, even though they both live in the hydraulics and pneumatics aisle. The Concentric Hydraulic Flow Divider 1300637 is a flow-control component, while the AMRAP Co cylinder is a linear actuator. Understanding that difference matters more than the price gap, because the two parts are not interchangeable.
Quick Verdict
If your circuit needs even flow across multiple branches, the Concentric Hydraulic Flow Divider 1300637 is the component to pick. If your task is linear push and pull, the AMRAP Co cylinder is the right tool. Both are hydraulic parts, but they are not competing for the same job.
Comparison at a Glance
| Product | Listed Price | Price Bar | Condition | Best For |
|---|---|---|---|---|
| Concentric Hydraulic Flow Divider 1300637 | USD 425.00 | New - Open box | Splitting and regulating hydraulic flow | |
| 2.5x6 Hydraulic Cylinder 2.5" Bore 6" Stroke Double Acting Tie-Rod Cylinder | USD 126.34 | New | Linear push and pull action |
Where Each Product Wins
Where the Flow Divider Wins
The Concentric 1300637 is the stronger choice when you need a single hydraulic source to feed several branches with predictable, even flow. Its concentric design is oriented toward precise distribution, and the 1300637 model is a specialized unit rather than a general-purpose cylinder. If you are building or upgrading a hydraulic circuit that requires flow division, this is the product that matches the task.
Where the Cylinder Wins
The AMRAP Co cylinder wins when the job involves converting hydraulic pressure into straight-line motion. With a 2,500 PSI peak operating pressure, it is suited to linear actuation tasks such as pushing, pulling, lifting, or holding a load. Choose it when the task is actuation rather than flow control.
Product Notes
Concentric Hydraulic Flow Divider 1300637
The Concentric Hydraulic Flow Divider 1300637 is a specialized unit, not a general-purpose cylinder. It is listed at $425.00 and is intended for hydraulic systems that need controlled, even fluid distribution across multiple components. The concentric design is built for precise and efficient flow splitting, and the model number 1300637 comes from Concentric. One reason to choose it is when you need consistent flow to several branches from a single pump. One limitation to keep in mind is the condition: New - Open box. That means the original packaging may have been opened, so give the unit a close look before placing it into service. It also costs significantly more than the cylinder, so it should be reserved for work that genuinely requires flow division rather than moving a load.
2.5x6 Hydraulic Cylinder 2.5" Bore 6" Stroke Double Acting Tie-Rod Cylinder
This AMRAP Co cylinder is a double-acting tie-rod cylinder with a 2.5-inch bore and a 6-inch stroke, listed at $126.34. It carries a 2,500 PSI max operating pressure and a 12,270 lb column load, which makes it a compact workhorse for pushing and pulling. It is new and manufactured in India. Choose it when you need linear motion in a hydraulic system and want the lower price point. The main limitation is that it cannot divide or distribute flow-it is built to move a load through a fixed stroke. With retracted and extended lengths around 16 1/4 inches and 22 1/4 inches, it fits projects where space and stroke length are known.
Final Choice by Use Case
If you are designing a hydraulic circuit that must split output from a single pump into two or more functions, the Concentric Hydraulic Flow Divider 1300637 is the component for you. It handles a job the cylinder cannot do.
If you need to push, pull, lift, or hold a load using hydraulic pressure, the AMRAP Co cylinder is the better fit for your build. It gives you linear actuation in a compact package.
