Choosing between two used Goulds 3196 process pumps for an industrial pumps flow-control line usually comes down to one question: is the lower price more valuable to you than a more clearly specified pump? Both are used units from the same 3196 family, but they are not identical on paper.
Quick Verdict
If keeping the initial cost down is your priority, the Goulds Pump 3196-4X6-10G is the pick. If you want a pump with impeller and port sizes listed before you commit, the Goulds 3196 STi 1x1.5-8 is worth the higher price.
At a Glance
| Consideration | Goulds Pump 3196-4X6-10G | Goulds 3196 STi 1x1.5-8 |
|---|---|---|
| Listed price | USD 1,167.60 | USD 1,625.00 |
| Condition | Used | Used |
| Pump type shown | Process centrifugal pump | ANSI end-suction straight centrifugal pump |
| Standout listing detail | Two-year coverage plan included | Impeller size, port sizes, and max RPM listed |
Where Each Wins
- The Goulds Pump 3196-4X6-10G wins if your main concern is the upfront price.
- The Goulds 3196 STi 1x1.5-8 wins if you need an end-suction configuration and want the pump details spelled out before buying.
Product Notes
Goulds Pump 3196-4X6-10G -FRAME Process Centrifugal Pump USIP
The price advantage belongs to this pump. This Goulds 3196-4X6-10G -FRAME process centrifugal pump is the lower-cost option of the two, which matters when a flow-control line needs a replacement without a large capital outlay. The listing also includes two-year coverage in the purchase price, so the used unit arrives with a degree of protection. The used condition is the trade-off: any pre-owned process pump should be inspected against its intended service before installation. If you already know the 3196 family, this model number gives you a familiar starting point, and the money you save can go toward installation or other line components.
Goulds 3196 STi 1x1.5-8 ANSI End-Suction Centrifugal Process Pump 6.750
This one gives you more to work with before purchase. Impeller size, port sizes, maximum RPM, and US origin are all shown, which makes it easier to confirm the pump matches your flow-control application. The cost is higher: it is the more expensive of the two used 3196 pumps here, so your upfront spend goes up. The used condition is still part of the deal, which means the pump should be inspected before it goes into service. If you need the configuration spelled out on the listing, the Goulds 3196 STi 1x1.5-8 is the one that delivers that clarity.
Final Choice by Use Case
- If initial cost is the main constraint, the Goulds Pump 3196-4X6-10G keeps more of your budget in reserve.
- If your flow-control line needs a straight centrifugal pump in a documented configuration, the Goulds 3196 STi 1x1.5-8 is the better match.
- If you are flexible on configuration, choose the lower-priced 3196-4X6-10G and spend the savings on installation.
