Choosing an industrial pump for flow control is not a one-size-fits-all decision. You have a wide spread in front of you: a peristaltic pump with controller plus three ANSI-style centrifugal process pumps, from $1,291.09 to $6,200. The real decision tension is what you need to move, how much head or flow the job demands, and how much condition risk you can accept.
Listed-price comparison
| Product | Listed price | Price bar | Type | Condition |
|---|---|---|---|---|
| Cole Parmer Masterflex B/T Process Pump with Rapid-Load Pump Head and Controller | $1,291.09 | Peristaltic | Used | |
| DXP PUMPWORKS PWA-1X2X10 Compliant Low-Flow Centrifugal Process Pump | $2,899.00 | Low-flow centrifugal process pump | New - Open box | |
| Goulds 3196 STi 2x3-6 Centrifugal Process Pump 316SS | $3,950.00 | Centrifugal process pump | Used | |
| Goulds 3196XL 6x8-15 ANSI Centrifugal Process Pump 1200 GPM 175FT Head | $6,200.00 | Centrifugal process pump (water) | Used |
The price spread across these four options is $4,908.91, from the Cole Parmer Masterflex at $1,291.09 to the Goulds 3196XL at $6,200.00. The spread tracks different pump designs and configurations: one is a complete peristaltic pump and controller, two are used Goulds centrifugal pumps, and one is a new open-box low-flow centrifugal process pump.
Decision matrix
| Product | Choose it if | Keep in mind |
|---|---|---|
| Cole Parmer Masterflex B/T Process Pump | You want a complete system with pump drive, rapid-load head, and controller. | Heavy cosmetic wear and rust on motor housing and frame. |
| DXP PUMPWORKS PWA-1X2X10 | You want a compliant low-flow centrifugal process pump in new open-box condition. | Open-box condition means the included parts list is not fully defined. |
| Goulds 3196 STi 2x3-6 | You have a motor and base already and need a 316SS bare pump end. | No motor, baseplate, or coupling included. |
| Goulds 3196XL 6x8-15 | You need the only explicit 1200 GPM / 175 ft head rating in this set. | Used pump with higher-duty performance. |
Product notes
DXP PUMPWORKS PWA-1X2X10 Compliant Low-Flow Centrifugal Process Pump
The DXP PUMPWORKS PWA-1X2X10 is the only new open-box option among these four, and its title and description tie it directly to ANSI/ASME B73.1 compliance. The description points to a back pull-out design, sealed lubrication chamber, and a power frame with increased cooling surface, which are useful talking points for a process line that emphasizes serviceability. The limitation is the condition: open box is not a sealed factory unit, and the listed motor and variable frequency drive specs are broad enough that you should define exactly what is included with the pump before treating this as a complete package.
Goulds 3196XL 6x8-15 ANSI Centrifugal Process Pump
The Goulds 3196XL 6x8-15 is the one with the most specific performance claim in the group: 1200 GPM at 1800 RPM and 175 ft head, matching the nameplate and description. That makes it the clear reference point if your flow-control decision is driven by capacity and head rather than by size. It is a used pump from Canada, described as a solid, good working pump housing, ready to service or integrate into a process line. The trade-off is scale and condition: this is a large used unit, so integration planning is part of the decision, and you are buying a pump that will need service rather than a sealed new package.
Goulds 3196 STi 2x3-6 Centrifugal Process Pump 316SS
The Goulds 3196 STi 2x3-6 is the bare pump end in this comparison, with 316SS material and a 2x3-6 size. Because it is a bare pump end only, it is the right candidate if you already have a motor and base and want to build around a compact ANSI centrifugal pump. The title and description are consistent on the 316SS construction and the 3196 family interchange, so you can place it in the same service family as the larger Goulds 3196XL listed here. The limitation is explicit: no motor, no baseplate, no coupling. That keeps the scope of supply smaller, but adds the responsibility of sourcing and matching the remaining drive components yourself.
Cole Parmer Masterflex B/T Process Pump with Rapid-Load Pump Head and Controller
The Cole Parmer Masterflex B/T Process Pump is the only peristaltic option in this group. It comes as a system with the 77110-12 drive, Rapid-Load pump head installed, and the 77110-10 controller. For flow-control work that relies on tube-based pumping, this is the direct alternative to the centrifugal pumps in this comparison. The unit is described as working, with the pump head opening and closing as intended and the controller communicating with the drive. The visible trade-off is heavy cosmetic wear and rust on the motor housing and frame, so the decision here is function over appearance.
Final recommendation by use case
If you need a complete pump and controller setup, the Cole Parmer Masterflex B/T Process Pump is the system-level match. If you need a used 316SS pump end and already have a motor and base, the Goulds 3196 STi 2x3-6 puts the build in your hands. If you want a new open-box ANSI-style pump for low-flow process duty, the DXP PUMPWORKS PWA-1X2X10 is the one to compare against a full system. If the job is defined by flow and head, the Goulds 3196XL 6x8-15 delivers the only explicit 1200 GPM / 175 ft head rating.
