When you're shopping for industrial valves, you may be deciding between two products that both sound like they belong in the same category but actually solve different problems. The JBF set is a handwheel pair, while the ASCO 8215C83 is an electrically operated valve. One is for restoring an existing valve; the other is for automatic flow control. Before you choose, you need to know which job you're actually trying to complete.
Quick verdict
If the goal is a working electrically controlled flow valve, the ASCO 8215C83 is the right pick. If the goal is to replace missing handwheels on an existing valve and you're comfortable reconditioning rusty metal, the JBF pair is the one that matches that task.
Price and operation at a glance
Both products are industrial valve components, but they sit at different points in a valve's lifespan. The table below shows the main differences.
| Product | Price | Valve Operation | Condition | What It's For |
|---|---|---|---|---|
| JBF Cast Iron Valve Handwheel 3-Spoke Pair | USD 25.49 | Manual | For parts or not working | Replacing or restoring handwheels on a manual valve |
| NEW ASCO 8215C83 2-inch NPT 2-Way NO Solenoid Valve | USD 95.55 | Solenoid | New - Open box | Electrically controlled flow in a 2-inch NPT line |
Where each product wins
The JBF pair wins for restoration and replacement work. It includes two matching 3-spoke handwheels with raised center hubs and a visible 'JBF' casting mark. The catch is that it's pre-owned and sold for parts, with heavy rust, pitting, and flaking throughout.
The ASCO 8215C83 wins for installations that need a complete, functional valve. It's a normally open valve rated for 0-25 PSI, and it operates on 120/60 120VAC. Choose it when you need electric actuation rather than turning a wheel by hand.
Product notes
JBF Cast Iron Valve Handwheel Pair
If your existing valve is missing its handwheels, this pair gives you two matching replacements with raised center hubs and a 'JBF' marking on one spoke. The operation is manual, so it suits a valve that is turned by hand. The limitation is the condition: the set is pre-owned, sold for parts or not working, with heavy rust, pitting, and flaking across the metal. You'll need to clean, wire brush, and treat the rust before installation or display. That makes it a restoration piece or a source of replacement handwheels rather than a ready-to-install component. If you have the time and tools for rust removal and repainting, this is a practical option; if not, the condition will turn into a project of its own.
NEW ASCO 8215C83 2-inch NPT 2-Way NO Solenoid Valve
The ASCO 8215C83 is a complete industrial solenoid valve, not a replacement part. It's a 2-inch NPT, 2-way, normally open valve rated for 0-25 PSI and operating on 120/60 120VAC. The unit is new open-box inventory, so you receive the exact part shown rather than a retail box. Choose it when you need electric actuation to control flow in a 2-inch line. The limitation is that you need to confirm your electrical supply, port size, and pressure range match its specifications, and because it's open-box, the packaging is not original. This option gives you a functional valve rather than parts to be reconditioned.
Final choice by use case
Choose the ASCO 8215C83 if you need a working electrically controlled valve for automatic flow control.
Choose the JBF Cast Iron Valve Handwheel Pair if you're restoring an existing valve and need replacement handwheels, and you're prepared to clean and repaint rusted metal.
