Industrial pumps flow control usually comes down to one question: what kind of power do you already have at the pump location? If you are working around hydraulic lift tables, a hydraulic gear pump makes sense. If you are moving chemicals or petroleum fluids and you have compressed air, an air-operated double diaphragm pump is the practical route. Here is how the Vestil Hydraulic Gear Pump and the 120PSI Air-Operated Double Diaphragm Pump compare.
Quick Verdict
For a direct hydraulic component in material handling equipment, the Vestil Hydraulic Gear Pump is the right fit. For air-powered chemical or petroleum transfer, the 120PSI Air-Operated Double Diaphragm Pump is the practical choice. The Vestil lists at USD 170.00, and the diaphragm pump lists at USD 126.01, so the price spread is USD 43.99.
Side-by-Side Comparison
| Pump | Listed Price | Drive | Best For |
|---|---|---|---|
| Vestil Hydraulic Gear Pump For Industrial Use | USD 170.00 | Single-acting hydraulic gear pump | Lift tables and material handling hydraulic circuits |
| 120PSI Industrial Chemical Air-Operated Double Diaphragm Pump 1" Inlet+Outlet | USD 126.01 | Air-operated double diaphragm | Chemical and petroleum fluid transfer up to 35 GPM |
Where Each Pump Wins
- Vestil Hydraulic Gear Pump wins for material handling hydraulics. If your lift table uses a gear pump with .06 displacement and a tang shaft, this Vestil unit is built for that role.
- 120PSI Air-Operated Double Diaphragm Pump wins for chemical transfer. If you need to move chemicals or petroleum fluids with compressed air, this pump is the flow-control match.
Product Notes
Vestil Hydraulic Gear Pump For Industrial Use
The Vestil pump is a single-acting hydraulic gear pump, and its intended territory is material handling equipment like the Vestil PE and DJG series lift tables. That makes it a direct fit for that hydraulic workflow. The .06 displacement and tang shaft are the specs that matter if you are repairing or replacing a pump in that application. It comes as a new unit, so you can treat it as a ready-to-use industrial component. The limitation is that it is a hydraulic pump, not a fluid transfer pump; if your flow control job involves chemicals or petroleum, you will need the air-operated diaphragm pump.
120PSI Industrial Chemical Air-Operated Double Diaphragm Pump 1" Inlet+Outlet
This pump is built for air-powered transfer of chemicals, petroleum fluids, and similar liquids. It has a 1-inch inlet and outlet, can move up to 35 gallons per minute, and is rated for 120 PSI. The aluminum body, acetal balls, and nitrile diaphragm are the wetted-part details to check against your fluid. It also handles temperatures up to 150 degrees F. The limitation is the air supply: it needs an NPT 1/2 inch air inlet and consumes 38 CFM on average, so your compressor has to keep up. With that air capacity in place, it becomes a versatile transfer option.
Final Choice by Use Case
- Repairing or replacing a hydraulic lift table pump: Vestil Hydraulic Gear Pump.
- Moving chemicals or petroleum fluids with compressed air: 120PSI Air-Operated Double Diaphragm Pump.
- Already have steady air at the pump location? The diaphragm pump is the flow-control option.
- Working on hydraulic material handling equipment? The Vestil gear pump is the direct hydraulic component.
