Quick take
Choosing an industrial valve usually starts with one question: how do you plan to actuate it? The four valves here are split among manual, solenoid, and directional-control designs. The listed prices for these four products span USD 89.99 to USD 180.00, so the final decision often comes down to matching the valve type to the system you already have.
What to look for
Before picking one, think about valve operation, port configuration, media compatibility, and condition. Solenoid valves need the right coil voltage and a control signal; hydraulic valves need a hydraulic source; manual valves need someone to operate them at the valve. The product notes below highlight where each of these valves lands on those trade-offs.
Listed prices at a glance
| Product | Listed Price | Price Bar |
|---|---|---|
| TeeJet AA17L Stainless Steel Control Valve | USD 89.99 | |
| ASCO 8215C83 120VAC 2-Way NO Industrial Solenoid Valve | USD 95.55 | |
| WIC Valve 2-Inch Plastic Manual Override Electric Solenoid Valve | USD 174.99 | |
| Hydraulic Directional Control Valve BYD 30922-496 D 4-Port Industrial Valve | USD 180.00 |
Decision matrix
| If your priority is... | Start with... |
|---|---|
| Manual water control in a sprayer system | TeeJet AA17L Stainless Steel Control Valve |
| Solenoid control for air, inert gas, liquid, or water | WIC Valve 2-Inch Plastic Manual Override Electric Solenoid Valve |
| A 120VAC two-way solenoid with a 0-25 PSI range | ASCO 8215C83 120VAC 2-Way NO Industrial Solenoid Valve |
| Four-port industrial valve use | BYD 30922-496 D 4-Port Industrial Valve |
Product notes
TeeJet AA17L Stainless Steel Control Valve
The TeeJet AA17L is a new, stainless steel manual control valve for water spray systems. It uses manual valve operation, so flow changes are made at the valve without energizing a coil or supplying hydraulic pressure. It carries a 300 PSI maximum pressure rating, which fits high-pressure sprayer duty. The MPN AA17L gives you a clear part number to reference when matching a replacement. The trade-off is that manual operation means no automatic response to a signal; if your job needs remote or signal-based actuation, this is not the valve to choose.
ASCO 8215C83 120VAC 2-Way NO Industrial Solenoid Valve
The ASCO 8215C83 is a two-way, normally open solenoid valve with 2-inch NPT ports, a 120VAC coil, and a 0-25 PSI pressure range. It is listed in new open-box condition, so the valve body is new but the original box is not included. If your application needs a solenoid that stays open until the coil is energized, this ASCO model matches that behavior. The 0-25 PSI range defines the low-pressure service window, so plan around that limit before committing to the part.
WIC Valve 2-Inch Plastic Manual Override Electric Solenoid Valve
For automated on/off control plus a backup way to open the valve without power, the WIC Valve 2PCH-2-110VAC-D fits. It is a two-inch NPT, normally closed solenoid valve with a 110V AC coil, and it opens when the coil is energized. The suitable media range covers air, inert gas, liquid, and water, and the PA66 plastic body keeps it lighter than cast iron. The manual override is the differentiator here, letting the valve be opened manually when there is no electricity supply. The limitation is the plastic construction; if you need a metal-bodied process valve, this PA66 solenoid is not that option.
BYD 30922-496 D 4-Port Industrial Valve
If your flow control problem is on the hydraulic side, the BYD 30922-496 D is the hydraulic directional control valve in this lineup. It has a cast-iron body and four labeled ports (A, B, C, D) plus an OUT port, so port identification is straightforward. It comes from surplus equipment, and the condition is used with normal cosmetic wear such as surface marks and scratches, with no cracks or visible damage to the body. That makes it a practical pick when you want a hydraulic directional valve for industrial or mobile equipment and are comfortable with used-condition parts. The limitation is that it is used, not newly manufactured, so expect prior-service wear even though the ports are clean and capped.
Final recommendation by use case
Base your choice on actuation style and the system you are connecting. If you want a manual stainless control valve for sprayer work, start with the TeeJet AA17L. For the normally open solenoid, go with the ASCO 8215C83. For a 110VAC solenoid option, look at the WIC Valve 2PCH-2-110VAC-D. For hydraulic flow control in a used industrial valve, choose the BYD 30922-496 D.
