Quick verdict
If you need an electrically controlled on/off valve for a 2-inch pipeline and want a local backup when the coil isn't powered, the WIC Valve 2" Plastic Manual Override Flow Control Electric Solenoid Valve NC 110V AC is a straightforward choice. Listed at USD 174.99, it combines a 2" NPT female inlet and outlet, a PA66 plastic body, and a normally closed solenoid that opens when the 110/120V AC coil is energized.
Who it suits
This valve fits setups where air, inert gas, liquid, or water flow must be stopped by default and only allowed through when the coil receives power. Because the valve is normally closed, it can serve as a fail-closed isolation point. The manual override is useful during commissioning, power loss, or when you need to cycle the valve without sending a signal to the coil.
What stands out from the listed details
The 2PCH-2-110VAC-D model has 2-inch NPT female ports on both sides, making it sized for larger industrial lines. The PA66 plastic construction offers a lightweight alternative to metal bodies. The NBR seal is specified in the description, and the valve is designed for air, gas, liquid, and water service. The pilot-operated design is noted in the listing, and the valve can be mounted in any position, which simplifies placement in tight piping layouts.
Another point in its favor is the manual override switch. Even if the coil is de-energized, the valve can be opened manually-a practical feature for maintenance or emergency flow. For a normally closed valve, this gives you a way to get flow moving without relying on the electrical circuit.
Meaningful trade-offs
The normally closed action means the valve stays shut when the coil is not energized. That is ideal for safety-centric systems, but it also means the valve will not open if the power supply fails, unless you use the manual override. Also, the listing identifies this as a pilot-operated valve rather than a direct-acting unit, so you'll want to make sure your system pressure and flow are compatible with that operating principle. The product details do not include a pressure range or IP rating, so those remain part of your own system planning.
At USD 174.99, this is a single valve purchase for a specific 2-inch application rather than an inexpensive small-bore component. Given the size and the built-in manual override, the price reflects the utility of having both electric and manual control in one unit.
Bottom line
The WIC Valve 2" Plastic Manual Override Flow Control Electric Solenoid Valve NC 110V AC is a sensible option for someone who needs a 2-inch NPT, normally closed solenoid valve for water, air, gas, or liquid service and wants manual override capability. It offers a clear operating logic: power to open, no power to close, with a manual fallback when needed.
WIC Valve 2" Plastic Manual Override Flow Control Electric Solenoid Valve NC 110V AC
This 2PCH-2-110VAC-D unit is listed at USD 174.99 and comes with 2" NPT female ports. The strongest reason to choose it is the manual override switch combined with normally closed electro-pilot operation, which suits remote on/off control plus local manual opening. The main limitation is that it is a normally closed valve, so without coil voltage it stays closed until you use the manual override. If your application depends on the valve staying open without power, this model's default closed state is not the fit.
