Compare industrial components & MRO by use case, features, trade-offs, price, returns, and seller terms before you buy.
Choosing between a manual wafer butterfly valve and a used air/CO2 flow modulator kit with pressure regulators and a control board? We weigh the trade-offs in price, condition, and capability.
Choosing the right industrial motor replacement depends on voltage, phase, and mechanical fit. We compare a bathroom vent motor, a Bridgeport mill motor, an OEM Broan motor, and a direct-replacement 1/3 HP motor across a $22.99 to $1,499.99 range.
Compare four filtration separation options: a 20-pack whole-house sediment cartridge set, a six-pack water filter, a 1-micron liquid filter bag, and a compressed air filter with auto drain.
Choose between 5 HP 184T motors and 2 HP 56C motors with this industrial motor guide. See how three-phase and single-phase options compare from $175.10 to $455, and find the right motor for your frame, phase, and horsepower needs.
From a $19.99 filter sock to a $1,886 oil-water separator, these four filtration separation options handle different jobs. This guide compares formats, prices, and what each one is built to do.
Choose the right filtration separation unit by matching it to your air lines, coolant tank, or process gas. This guide covers a $158 air dryer, two $1,886 oil-water separators, and a used nitrogen membrane.
Choosing between the new Goulds 3196LF and the used Goulds 3196 i-Frame for industrial pumps flow control? We compare the $3,825 new pump against the $2,200 used unit to point you to the right match.
From a $19.99 1-micron filter sock to a $550 stainless bag housing, this filtration separation comparison helps you match the right filter to your liquid or compressed-air line.
One costs $3,234.89 more than the other, and they do different jobs: a complete ANSI centrifugal process pump versus a low-cost drive USB connection kit. Here's how to match the right one to your pumping task.
Deciding between a silicone lubricant and a contact cement? Compare the 11 oz two-pack spray at $10.05 with the DAP Weldwood 3 oz adhesive at $14.00 and find out which one completes your toolbox.
Compare four very different ways to move air, gas, or fluid: a 40-foot LPG hose, a blue PU air line, a 10-piece brass quick-connect kit, and a 3/4-inch Parker industrial hose. Price, condition, and use case determine which one fits.
Comparing four 5 HP industrial motors from $128.79 to $455 to help you pick between single-phase and three-phase, 56 and 184T frames, and 1,750/1,800 vs 3,450 RPM.
Choosing an industrial motor replacement means matching voltage, phase, mounting, and the machine itself. This guide compares a $18.99 blower bracket, a $24.99 fan motor, a $114.99 OEM replacement, and a $1,499.99 mill motor so you can pick the right part for the job.
Compare four bearing options - an RBC S48L cam follower lot, a 6200-series ball bearing, a compact thrust needle bearing, and a mixed industrial assortment - and see which one fits your repair, your shaft, and your budget.
Four Baldor-Reliance industrial motors from $275 to $700, including single-phase, three-phase, high-speed, and motor-plus-reducer options, with a clear pick for each shop setup.
Compare four hydraulic hose end fitting packs from $41.99 to $47.14: 1/2" NPTF male, 3/8" and 1/2" JIC 37° female swivel, and 3/4" male JIC. Match thread and hose size with this guide.
Compare four filtration separation options: a 5-micron air filter with auto drain, a 4-stage air dryer/water separator, a 220V chemical filter for electroplating, and 1-micron filter socks. Pick the right one for your fluid and line.
Compare four industrial motor replacements spanning $24.99 to $1,499.99, from a 60W fan motor to a 3HP variable-speed mill motor, and find the one that matches your setup.
Choosing between a ready-to-use PVC air hose, bare PU tubing coils, and a brass quick-connect kit comes down to how much assembly you want and how you plan to route the line. This guide covers four options from $10.09 to $20.95.
These four replacement motors span $83.99 to $1,499.99, from a modest 115V unit to a three-phase mill motor. Use the comparison table and product notes to match your machine's horsepower, phase, and fit before you buy.
Finding more guides for you…