Quick take
The hardest part of shopping for industrial motors is matching the new part to the machine, not choosing a brand. You need to line up voltage, horsepower, phase, and fit before you compare prices. The four motors here cover very different jobs: the range starts at $83.99 and runs to $1,499.99, with the lowest-priced motor aimed at smaller replacement work and the highest-priced motor built for three-phase Bridgeport-type mill heads. In between, a Century pump motor and a Broan-Nutone replacement motor occupy their own specific corners. Use the table to see the price spread at a glance, then read the product notes to find the motor that matches your equipment.
Listed price comparison
| Motor | Price | Price Bar | Where It Fits |
|---|---|---|---|
| VSM3 Replacement Motor for Bridgeport-Type Import Mills | USD 1,499.99 | Three-phase Bridgeport-type mill heads | |
| Century VGreen EVO 2.25 THP Square Flange Variable Speed Motor | USD 555.00 | Pump motors with a square flange | |
| Broan-Nutone 99080483 Replacement Motor | USD 114.99 | Broan model-specific replacements | |
| D1092 OEM Direct Replacement Motor 1/3 HP 1675/1080 RPM | USD 83.99 | Fractional-horsepower 115V replacements |
Decision matrix
- Need a three-phase motor for a Bridgeport-type import mill? The VSM3 is the clear candidate, and it comes with the drum switch and pulleys.
- Need a pump motor with the VGreen EVO feature set? The Century motor was built around that pump application.
- Need a like-for-like Broan replacement? The Broan-Nutone 99080483 keeps the decision simple around the model number.
- Need a low-cost motor for light replacement work? The D1092 is the straightforward pick.
Product notes
VSM3 Replacement Motor for Bridgeport-Type Import Mills
This 3HP three-phase motor is the heavyweight of the group. It targets import Bridgeport-type mill heads, and the package includes the drum switch and pulleys, so the swap can be more than just the motor itself. The frame is identified as 100L, with a 6-inch shaft, and the motor can be wired for 440/220 volts; it is wired for 220V three-phase. It also comes with a wiring diagram on the tag. The trade-offs are the price, which is the highest in this set, and the need for a three-phase power supply. This motor is built for the milling crowd, not for general-purpose jobs.
Century VGreen EVO 2.25 THP Square Flange Variable Speed Motor
The Century VGreen EVO is the variable-speed pump motor here, with a square flange and a 2.25 THP rating. It carries a minimum pump power requirement of 2 1/2 hp, so it fits pump systems looking for that power window. Iron and plastic are the stated materials, giving it a mixed-metal and composite build. The trade-off is focus: this motor is designed around pump applications, so it will not behave like a general-purpose replacement. If your pump setup already expects a square flange and that minimum power requirement, the VGreen EVO pairs directly with that need. It is the middle option in price, but its value is in the pump-specific feature set.
Broan-Nutone 99080483 Replacement Motor
The Broan-Nutone 99080483 is an OEM replacement motor sold under the Broan model number. Physical size is spelled out clearly: 6.8 inches long and 6.4 inches deep, and its country of origin is Vietnam. This is a simple replacement path when your existing unit matches a Broan model, because the model number is the main identifier. The trade-off is that the motor centers on dimensions and model number rather than variable-speed or high-horsepower specs, so it belongs in a like-for-like Broan replacement rather than a custom industrial build.
D1092 OEM Direct Replacement Motor
The D1092 is the low-priced entry in this group and takes on small jobs with 1/3 HP, 1675/1080 RPM, and 115V. It is marketed as an OEM direct replacement and comes from the NBK line, positioned as a replacement for Fasco motors. OEM names and numbers are for reference only, which keeps expectations realistic: the point is to replace a similar motor, not to guarantee an identical fit by model name alone. For a 115V fractional-horsepower replacement job, this motor covers the basics at the lowest price in the set. It does not have the power or phase of the larger industrial units here.
Final recommendation by use case
For a Bridgeport-type import mill needing a three-phase motor, the VSM3 replacement motor is the clear match, especially because the drum switch and pulleys are included. For a pump system that needs a Century motor with the VGreen EVO feature set, the VGreen EVO is the pump-oriented option. For a Broan-specific replacement where the model number lines up, the Broan-Nutone 99080483 is the straightforward choice. And for a simple low-cost replacement job, the D1092 covers the basics without the complexity of the bigger motors. Start with your machine's electrical and mounting needs, then let the price table show you which motor makes sense.
