Choosing an industrial motor comes down to matching power to the job. A 5HP air compressor motor and a 60W fan/trimmer motor both get their spin from single-phase AC, but they serve completely different machines. Here's a direct comparison to help you decide which one belongs in your shop.
Quick Verdict If you're powering a single-stage or two-stage air compressor that needs steady 1750 RPM output, the 5HP 184T motor is the clear choice. If you're replacing a small fan or trimmer motor and need a light 110V unit, the 60W motor is the affordable fit.
Comparison at a Glance
| Feature | 5HP Air Compressor Motor | 60W Fan/Trimmer Motor |
|---|---|---|
| Price | USD 449.99 | USD 24.99 |
| Voltage | 208-230V | 110V |
| Base RPM | 1750 RPM | 1250 RPM |
| Full Load Amps | 28.5-27A | 1.0A |
| Frequency | 60 Hz | 60 Hz |
| Motor Type | Induction/asynchronous | Induction/asynchronous |
| Phase | Single phase | Single phase |
| Current Type | AC | AC |
Where Each Motor Wins The 5HP motor wins on raw power, torque, and suitability for continuous air compression. Its TEFC (Totally Enclosed Fan Cooled) design and 184T frame make it a rugged option for heavy-duty equipment. The 60W motor wins on price, low current draw, and simplicity for light household and workshop applications.
5HP 1750RPM Air Compressor Electric Motor 184T Single Phase TEFC 208-230V
This motor delivers serious muscle for single-stage and two-stage air compressors, running at a steady 1750 RPM with a TEFC enclosure that keeps out dust and debris. The 184T frame and 208-230V wiring make it a straightforward fit for many compressor setups. If your equipment requires 5HP and a heavy-duty enclosure, this is the motor to build around. The trade-off is size and cost: at USD 449.99, it's a major investment, and the 28.5-27A draw means you'll need a circuit that can handle that load. It's also overkill for small appliances, so don't buy it for a fan or trimmer unless you're planning a serious retrofit.
YYF96-60-6 60watt 110V 60hz 1.0A Replacement Electric Motor For Fan Or Trimmer
If you're replacing a worn-out fan or trimmer motor, this 60-watt unit is a practical, no-fuss option at just USD 24.99. It runs on standard 110V household power, draws only 1.0A, and spins at 1250 RPM-enough for light-duty airflow and cutting tools. The six-wire setup gives you room to match your existing wiring. The downside is that it's not built for heavy loads or continuous industrial duty; a 60W motor won't drive an air compressor or any high-torque equipment. You'll also need to confirm the mounting and shaft match your trimmer or fan, since it comes as a replacement motor. If you're comfortable with basic wiring, it's a low-cost way to get a small machine running again.
Final Choice by Use Case For air compressors and agricultural equipment, the 5HP motor is the one to choose. For fans and trimmers that need a 110V replacement, the 60W motor gets the job done without emptying your wallet. If you're on a tight budget and your task is light-duty, go with the 60W. If you need continuous, high-power operation, the 5HP motor is worth the investment.
