Choosing between a compact fractional-horsepower motor and a high-power industrial motor is a common decision in industrial facilities. The Baldor 0962-28 is a small industrial motor, while the 184T frame motor is built for demanding loads. The two sit at different ends of the power spectrum, so the right choice depends on the torque and speed your equipment truly needs.
Before you commit, consider the actual running conditions: the type of load your machine drives, the voltage available in your facility, and the physical space for mounting. The two motors here take very different approaches to those questions.
Quick Verdict
If you need a light-duty motor for a small machine, the Baldor 0962-28 is the precise pick. If you need heavy power for pumps, compressors, or conveyors, the findmall motor is the stronger value, and it costs $64.05 less than the Baldor. That price gap matters when you are equipping several machines, but it is only part of the decision.
Comparison at a Glance
| Motor | Price | Horsepower | RPM | Phase | Brand |
|---|---|---|---|---|---|
| New Baldor 0962-28 1/4HP, 1425 Rpm, 3 PH | $395.00 | 1/4 HP | 1425 | Three-phase | Baldor |
| 1800 RPM 5 HP Electric Motor 184T Frame TEFC 230/460V Severe Duty 3 Phase | $330.95 | 5 HP | 1800 | Three-phase | findmall |
Both motors are new and three-phase, but their specifications lead in very different directions. The 1/4 HP rating and 1425 RPM output of the Baldor suit machines that run lightly; the 5 HP and 1800 RPM output of the findmall motor suit machines that run hard.
Where Each Motor Wins
The Baldor wins when the machine is small and the workload is light. It is easy to integrate and suits low-power machines. The findmall motor wins when the job demands high torque and continuous operation. It is built for demanding industrial environments.
Product Notes
Baldor 0962-28 1/4 HP Motor
The Baldor 0962-28 is a new motor with a 1/4 HP rating and a 1425 RPM output. This compact power level is well suited to light applications such as small conveyors, fans, or auxiliary equipment that require only modest torque. The model-specific 0962-28 designation makes it straightforward to match to original equipment, which is a real benefit when you are replacing a failed motor on a specific machine. If your current motor is a fractional-horsepower unit, this Baldor is a logical replacement candidate. The limitation is clear: 1/4 HP is a very small output, so it is not intended for heavy loads or continuous high-torque work. For any application that needs more than light duty, this motor will be undersized. The motor's compact design also leaves more room around the driven equipment, which can simplify maintenance access in tight enclosures.
findmall Severe-Duty Electric Motor
The findmall electric motor delivers the high output needed for pumps, compressors, and conveyors. It includes a TEFC/IP55 enclosure, so it is built for dusty or wet conditions, and the 230/460V dual-voltage wiring gives flexibility across different industrial systems. The 1.15 service factor allows it to handle a 25% overload, a useful margin for tough duty cycles. The trade-off is physical bulk: this motor weighs 104 lbs, so mounting requires a sturdy base and careful handling. If your setup needs a compact motor, the size and weight could be a drawback. However, for a permanent installation where space is available, that heft translates into stable, robust operation. The severe-duty design is clearly aimed at high-demand environments.
Final Choice by Use Case
For light-duty tasks, the Baldor 0962-28 is the right fit, especially if you are replacing a fractional-horsepower motor. For heavy-duty industrial work, choose the findmall motor, particularly for pumps, compressors, and conveyors. If you are setting up a new production line, the extra output of the findmall motor gives you headroom, while the Baldor is better for small auxiliary equipment.
