Choosing between industrial motors usually starts with the job you need to power. One option is a compact motor. The other is a dual-voltage workhorse with a sealed enclosure. Both are new, but they are aimed at very different workloads. Getting this decision right matters because the wrong motor can be too weak for the task or impossible to connect to your existing supply. Think about the supply voltage before you compare torque.
Quick Verdict
If you need a smaller motor for a low-load application, the Baldor 0962-28 is the straightforward pick. It keeps the purchase simple when your machine is already built around the motor it was designed to use. If you need more horsepower and want a motor that can run on either of two common voltages, the 56C TEFC motor gives you far more power for $219.90 less. The price gap matters, but the power gap matters more. Most shops that are starting fresh will find the 56C motor easier to justify.
Comparison Table
| Specification | Baldor 0962-28 Motor | 2 HP 56C TEFC Motor |
| Price | USD 395.00 | USD 175.10 |
| Horsepower | 1/4 HP | 2 HP |
| Phase | Three-phase | Three-phase |
| Condition | New | New |
Where Each Product Wins
The Baldor 0962-28 wins for lower-output installations that need a specific replacement model and a modest motor. Its part number makes it easy to source, and its low horsepower keeps it suitable for light-duty machinery. The 56C motor wins for general-purpose work where dual-voltage flexibility and a common mounting frame make installation straightforward. It gives you much more power for the same supply type.
Product Notes
Baldor 0962-28 Motor
This Baldor motor is for installations that need a modest 1/4 HP output. The 0962-28 model is new and built for three-phase service. Its modest rating fits equipment that doesn't need high torque. Choose it when your machine already calls for the Baldor 0962-28 replacement part and a low-horsepower, three-phase motor is enough to do the job. The 0962-28 part number clearly identifies the exact Baldor unit you are getting. The main limitation is power: 1/4 HP is a small output, so this motor will not handle heavy loads.
2 HP 56C TEFC Motor
This motor brings 2 HP in a three-phase package, making it the stronger choice for shop equipment that actually does work. The 230/460V dual-voltage rating means you can wire it for either supply, and the TEFC enclosure offers good protection against dust and dirt. The 56C frame and C-face configuration make it easy to connect to gearboxes or pumps. Choose it when you need 2 HP and you want a motor that can adapt to existing wiring. If your application calls for a general-purpose three-phase motor, this is the more versatile direction. The limitation is that it is a bigger, heavier-duty unit, so it may be oversized for small low-load tasks.
Final Choice by Use Case
For installations that need only lower-output power, the Baldor 0962-28 is the clear choice. For shops that need higher-output driving power and want dual-voltage wiring, the 56C TEFC motor is the more practical buy. The Baldor fills a specialized niche, while the 56C motor covers most general industrial duty in most shops. If your workload is light and fixed, stay with the Baldor; if it is heavy or varied, go with the 56C motor.
