Choosing an industrial motor usually comes down to matching the motor to the power supply and the machine it has to drive. One motor in this pairing is built for a specific high-voltage industrial circuit; the other is designed for air compressor duty. This head-to-head compares the New Baldor 0962-28 Industrial Electric Motor with an air compressor motor. The right pick depends on your equipment's wiring and the mechanical load it needs to carry.
Quick Verdict
If your machine is already wired for high-voltage service, the New Baldor 0962-28 is the direct match. If you are replacing the motor on an air compressor, the air compressor motor is the practical choice. These two are not interchangeable, so the motor that fits your power supply and your equipment is the one to buy.
Side-by-Side Comparison
| Product | Price | Key Specs | Best For |
|---|---|---|---|
| New Baldor 0962-28 Industrial Electric Motor 1/4HP, 1425 Rpm, 3 PH, 660V | $395.00 | 1/4 HP, 1425 RPM, 3-phase, 660V | High-voltage three-phase low-horsepower machinery |
| 5HP 1750RPM Air Compressor Electric Motor 184T Single Phase TEFC 208-230V | $449.99 | 5 HP, 1750 RPM, single-phase, 208-230V, TEFC, 184T | Single-phase air compressor repower |
Where Each Motor Wins
The Baldor 0962-28 wins when the machine needs a new motor on a high-voltage industrial circuit and the operating speed matches the original motor. It is a specialized solution for that type of installation. The air compressor motor wins when you are repowering an air compressor and need a motor built for continuous compressor work. It is the appropriate choice for a compressor replacement job.
The Two Motors in Detail
New Baldor 0962-28 Industrial Electric Motor 1/4HP, 1425 Rpm, 3 PH, 660V
The Baldor 0962-28 is a new industrial motor with a 1/4 HP rated load and a 1425 RPM base speed. It is listed as a three-phase, 660V motor, so it belongs on equipment with high-voltage three-phase wiring. The model number 0962-28 identifies the specific Baldor motor you are matching. For a buyer whose machine truly needs this output class, this motor fits the job. Its limitation is just as direct: a 1/4 HP drive with a 660V three-phase requirement is not going to serve a larger air compressor motor's job. That kind of duty calls for a fundamentally different motor, and this is not it.
5HP 1750RPM Air Compressor Electric Motor 184T Single Phase TEFC 208-230V
The 5HP 1750RPM Air Compressor Electric Motor is a single-phase induction motor in a 184T frame. It runs on 208-230V at 60Hz, with a listed full-load amp range of 28.5-27A. Its TEFC enclosure and IP54-rated rolled steel shell point to compressor service, and the motor is designed for multiple single-stage and two-stage air compressors. This is the motor to choose when the replacement job calls for a large single-phase 5 HP motor rather than a small high-voltage unit. The limitation is that it is a high-current, 5 HP motor built for compressor duty; it is not a substitute for a small high-voltage Baldor motor in a machine designed for that kind of drive.
Final Choice by Use Case
Choose the New Baldor 0962-28 at its $395 listed price when your machine needs a replacement motor for a high-voltage industrial circuit. Choose the air compressor motor at its $449.99 listed price when a compressor needs a motor built for compressor duty. If your priority is matching an existing high-voltage machine, the Baldor is the lower-priced option in this pair. If your priority is getting an air compressor running again, the compressor motor is the one to mount.
