Choosing an industrial motor starts with matching power, phase, and voltage to the machine you need to run. The right motor will last for one specific job; the wrong one won't start or could burn out quickly. Two options at opposite ends of the price range show how big that difference can be: the Baldor-Reliance VBM3554-S at USD 375.00 and the YYF96-60-6 replacement motor at USD 24.99. Both are AC motors, but they're built for completely different worlds.
Quick verdict
If you're running three-phase equipment such as a lathe, compressor, or conveyor, the Baldor-Reliance VBM3554-S is the only realistic choice here. It delivers 1.5 HP at 1755 RPM and accepts 208-230/460V inputs. If you need to bring an old 110V fan or trimmer back to life, the YYF96-60-6 provides a simple 60-watt, single-phase solution.
Price and spec comparison
| Feature | Baldor-Reliance VBM3554-S | YYF96-60-6 |
| Price | USD 375.00 | USD 24.99 |
| Motor type | Synchronous, three-phase | Induction/asynchronous, single-phase |
| Input voltage | 208-230/460V | 110V |
| Frequency | 60 Hz | 60 Hz |
| Speed | 1755 RPM | 1250 RPM |
| Power | 1.5 HP | 60 watts |
Where each product wins
- Baldor-Reliance VBM3554-S wins on power, phase flexibility, and industrial build. Its 1.5 HP output and 208-230/460V three-phase operation make it a real workhorse for stationary equipment. The 56C frame and TEFC enclosure also point to a motor designed for demanding shop conditions.
- YYF96-60-6 wins on price, simplicity, and compatibility with standard household 110V circuits. It draws only 1.0A, so it's an easy swap for a small fan or trimmer motor without rewriting the wiring.
Product notes
Baldor-Reliance VBM3554-S Industrial Electric Motor
This motor is a serious piece of equipment. The 1.5 HP output and 1755 RPM speed make it a solid match for equipment that needs consistent three-phase power. It runs on 208-230/460V and is a synchronous 60 Hz motor, so it stays locked to the supply frequency for stable operation. The 56C frame and TEFC (totally enclosed fan cooled) enclosure make it a good fit for a shop where dust and chips are common. The open-box condition means it pays to inspect the motor before installation, but the core specs give you a clear idea of its capability. If your shop doesn't have three-phase service or a phase converter, this motor isn't going to work for you. It's not a plug-and-play household appliance motor.
YYF96-60-6 60watt 110V 60hz 1.0A Replacement Electric Motor For Fan Or Trimmer
The YYF96-60-6 takes the opposite approach: a straightforward replacement motor aimed at light-duty fans and trimmers. It's rated at 60 watts on 110V and draws just 1.0A, so it will run on a standard household circuit. The 1250 RPM output is in line with many small air-moving and trimming tools, and the six-wire hookup gives you some flexibility in how you connect it. As an induction/asynchronous motor, it starts and runs without complex controls, which is exactly what you want in a simple retrofit. The tradeoff is clear: 60 watts won't drive anything close to the load capacity of the larger Baldor motor. For light household equipment, this motor handles the job without introducing the cost and electrical requirements of a three-phase setup.
Final choice by use case
Choose the Baldor-Reliance VBM3554-S if you have a three-phase, 208-230/460V power supply and need a motor that can handle serious shop or industrial equipment. Its 1.5 HP output and TEFC enclosure are worth the higher price.
Choose the YYF96-60-6 if you're repairing a fan, trimmer, or other small 110V appliance. The lower-priced option gets the job done and fits neatly into a light-duty single-phase setup.
