Filtration separation covers a lot of ground. In one buying session you might be choosing between a small precision basket and a large industrial liquid filter. This group of four products spans exactly that range: two vertical electroplating liquid filter machines, a compressed-air line particulate filter, and a small precision filter basket. The prices run from $45 to $2,245, so the right buy depends less on cost alone and more on what medium you need to separate and at what scale.
Quick take
If you are filtering industrial liquids for electroplating or chemical reagents, the two liquid filter machines dominate the high end. If you are protecting compressed-air tools and downstream equipment from water and debris, the compressed-air line filter is the one that fits that job. And if you need a small, precise basket for process or workshop filtration, the Normcore basket is the lowest-price entry and the only basket here.
Listed-price comparison
| Product | Listed Price | Price Bar |
|---|---|---|
| High-Flow Industrial Chemical Filter for Injection Molding Nickel Plating 220V | $2,245.00 | |
| Industrial Liquid Filter Machine 1500W 220V 3-Phase Electroplating Nickel Platin | $1,922.90 | |
| High Flow 5 Micron Industrial Air Filter with Auto Drain & Metal Bowl | $73.99 | |
| Normcore 51mm High Extraction Filter Basket, 16-18g High Uniformity Precision | $45.00 |
The bar visually shows how the two industrial liquid filters sit far above the air filter and the basket. The difference between the two liquid machines is $322.10 at list price; both are priced for larger industrial installations.
Decision matrix
- Industrial electroplating or chemical liquid filtration with high capacity: The TECHTONGDA High-Flow Industrial Chemical Filter for Injection Molding Nickel Plating 220V is the highest-priced option in the group. Its title points directly to chemical filtering, injection molding, and nickel plating use.
- Similar job with a 1500W 220V 3-phase unit: The PreAsion Industrial Liquid Filter Machine 1500W 220V 3-Phase Electroplating Nickel Platin also covers vertical electroplating solution filtration. The title calls out 1500W and 3-phase power, which can be a deciding factor if your facility uses three-phase.
- Compressed-air line cleanup: The High Flow 5 Micron Industrial Air Filter with Auto Drain & Metal Bowl addresses moisture and debris in compressed air lines for commercial and industrial settings.
- Precision basket: The Normcore 51mm High Extraction Filter Basket, 16-18g High Uniformity Precision is the basket option for setups that use a 51mm basket.
Product notes
High-Flow Industrial Chemical Filter for Injection Molding Nickel Plating 220V
TECHTONGDA's vertical liquid filter machine is built for high-capacity electroplating work. It is designed to handle electroplating solutions, chemical reagents, and other corrosive industrial fluids, and the flow emphasis in the title signals that it can move large volumes quickly. For a shop that needs an industrial-grade liquid filter, this is the most expensive option in the comparison, so it carries the largest upfront commitment. A practical limitation is that the title emphasizes the chemical filter role rather than electrical specs, while the PreAsion machine's title calls out wattage and phase more directly. If that spec visibility matters for your power setup, the other liquid filter may be easier to shortlist.
Industrial Liquid Filter Machine 1500W 220V 3-Phase Electroplating Nickel Platin
PreAsion's liquid filter machine is the alternative for industrial-scale liquid filtration. It is priced below the TECHTONGDA chemical filter, and the title explicitly includes 1500W and 3-phase, which gives you a concrete detail to evaluate against your facility's power. It is built around the same vertical electroplating solution filtration role, handling electroplating solutions, chemical reagents, and other industrial liquids. The limitation is that this is still a large, industrial-priced machine, not a compact or garage-scale filter. The deciding factor is whether your facility can use those power specs.
High Flow 5 Micron Industrial Air Filter with Auto Drain & Metal Bowl
This compressed-air line filter is the only true air-side option in the group. It is rated at 5 microns, uses a metal bowl, and is positioned for commercial and industrial compressed-air systems. The 140°F maximum temperature and 3/4" NPT connection size reinforce its role as a heavy-duty particulate and water trap. The reason to choose it is to keep moisture and debris out of compressed-air lines before they reach tools or accessories. Its limitation is that it is not a liquid filter; its compatibility is broad, so it fits the air-line role in the title rather than a universal filtration job.
Normcore 51mm High Extraction Filter Basket, 16-18g High Uniformity Precision
Normcore's 51mm filter basket is the entry-price product in the comparison and the only basket. The title highlights high extraction, high uniformity precision, and a 16-18g capacity, and it is framed as a precision tool for process engineering applications. It is a fit for a 51mm basket setup that needs repeatable, consistent filtering or screening at a small scale. The limitation is form-factor: it is a basket, not a filtration machine, so it handles basket-scale duties only. It also arrives in New - Open box condition, which is worth knowing if you prefer factory-fresh packaging.
Final recommendation by use case
For electroplating or chemical liquid filtration at industrial scale, the TECHTONGDA model is the one to put at the top of your list if you want the chemical-filter-specific title and are comfortable with the highest stated price. If the power specs in the PreAsion title align with your facility, that machine is the one to choose. For compressed-air line moisture and particulate protection, the compressed-air filter is the practical pick. And for a precision basket, the Normcore is the only one of these four that fits that job.
