Shopping for an industrial motor isn't like picking a light bulb. You have to match voltage, phase, mounting, and the job itself. The four units here illustrate that diversity: a 1 HP 575V WEG, a compact Baldor, a Gast motor/pump, and a 120V siren. They span $279.96 to $574.95, so price alone won't tell you which is right. The key is understanding whether you need to drive machinery, pump air, or sound an alarm.
Before you compare, note that voltage, phase, mounting, and duty cycle are the real filters. The WEG and Baldor are three-phase only; the Vixen Horns runs on single-phase 120V; the Gast, with no spec table, leaves matching up to you. Make a list of your power supply and the work the motor must perform.
Quick Take
- WEG 00112ET3H145T - A 1 HP, 575V three-phase foot-mounted motor with TEFC enclosure and a 1200 rpm 6-pole design.
- Baldor 0962-28 - A compact 1/4 HP motor at 1425 rpm that runs on 660V three-phase.
- Gast 1000055624 - A new open-box motor/pump combination built in the United States, but with no performance specs given.
- Vixen Horns VXS-1450AR - An electric-motor siren that runs on 120V and is meant for alarms, not mechanical power.
Price at a Glance
| Product | Price | Value Bar |
|---|---|---|
| WEG 00112ET3H145T | $279.96 | |
| Gast 1000055624 | $574.95 | |
| Baldor 0962-28 | $395.00 | |
| Vixen Horns VXS-1450AR | $296.58 |
Decision Matrix
| Product | Best For | Watch Out For |
|---|---|---|
| WEG 00112ET3H145T | 575V three-phase systems needing 1 HP and a foot mount | Requires 575V supply; 1200 rpm is a slow speed |
| Baldor 0962-28 | Light 1/4 HP jobs on 660V three-phase | Unusual voltage; small output |
| Gast 1000055624 | A new motor/pump ready to run, open box | Seller uncertain of exact application |
| Vixen Horns VXS-1450AR | Loud 120V warning signals in facilities | Not designed for mechanical power transfer |
Product Notes
WEG 00112ET3H145T
The WEG 00112ET3H145T is a 1 HP, 575V three-phase motor with a 6-pole design that spins at 1200 rpm. Its NEMA foot-mounted frame and TEFC enclosure suit it for agricultural or factory equipment that lives in dusty conditions. The IP55 rating adds protection against dust and water jets. The main reason to choose it is its combination of efficiency and the lowest sticker price in this group. The limitation: it needs a 575V three-phase power supply, which is rare in small shops, and the 1200 rpm speed is better for high-torque loads than for machines requiring fast rotation.
Baldor 0962-28
The Baldor 0962-28 is a small, new motor rated at 1/4 HP and 1425 rpm, running on three-phase 660V. Its compact size and standard frame make it a clean fit for a light-duty machine that already runs on a 660V network. If you're building or repairing a specific piece of equipment with a matching motor tag, this Baldor gives you a fresh unit with a clear model number. The catch is the non-standard voltage: 660V is less common than 120V or 240V, so you'll need a compatible power source or transformer. And at 1/4 HP, it won't handle anything beyond light loads.
Gast 1000055624
The Gast 1000055624 is an open-box motor/pump combination that the seller describes as new and fully functional, though they also note they're not sure exactly what it was designed for. It's assembled in the United States, and the condition is listed as new open-box. The reason to consider it is if you need a motor and pump already joined in one unit and are willing to adapt it to your project. The limitation is the unknown performance details: without published specs, you'll have to bench-test it to see if the output matches your needs. At the top of the price range, it's a gamble unless you can confirm its intended use.
Vixen Horns VXS-1450AR
The Vixen Horns VXS-1450AR is an electric motor-driven siren, not a general-purpose industrial motor. It runs on 120V, draws 7A, and is rated IP44 for limited water resistance. The metal housing and 4-bolt base make installation straightforward on a wall or post. This is the right choice if the "motor" you need is actually an alarm for a school, factory, or other facility. The limitation is that it does no mechanical work: you cannot couple it to a shaft or belt. If your need is audible warning, it's the only product here that does that, but for any rotating equipment, you'll need one of the other three.
Final Recommendation by Use Case
Pick the WEG if the motor will run on a 575V three-phase circuit and you need a durable, foot-mounted 1 HP package at a reasonable price. Choose the Baldor when your equipment is specifically designed for 660V and small horsepower. The Gast makes sense only if a ready-to-run motor/pump is worth the open-box uncertainty and the higher price. And if the job is to make noise, the Vixen Horns siren is the only motor that will do it.
