Choosing the right replacement industrial motor usually starts with the problem: the old motor is dead, the machine is waiting, and you need to know which new motor will actually match the job. The challenge is that "industrial motor" spans radically different equipment, from a 60-watt fan motor that runs on ordinary 110V to a 3 HP three-phase mill motor that needs a bigger power setup. The four motors compared here reflect that range. Each one is a new replacement unit, but they are not interchangeable, and the choice comes down to phase, power, output, and the machine it is meant to serve.
Quick take
If you need a three-phase spindle motor for a Bridgeport-type import mill head, the VSM3 replacement is a clear match, but it is also the most expensive motor here at USD 1,499.99. For a 115V shop motor with 1/3 HP and two speed points, the D1092 is the relevant middle option at USD 83.99. The Broan-Nutone 99080483 is a compact OEM-style replacement at USD 114.99, and the YYF96-60-6 sits at the lowest listed price, USD 24.99, for fan or trimmer duty.
Listed-price comparison
| Product | Listed price | Price bar | What it matches |
|---|---|---|---|
| Broan-Nutone 99080483 Replacement Motor, Broan | USD 114.99 | OEM-style replacement for Broan applications | |
| REPLACEMENT MOTOR for Bridgeport type IMPORT MILL 3HP 3PH variable speed VSM3 | USD 1,499.99 | 3 HP three-phase import mill head | |
| D1092 OEM Direct Replacement Motor 1/3 HP 1675/1080 RPM | USD 83.99 | 115V shop motor with two speed points | |
| YYF96-60-6 60watt 110V 60hz 1.0A Replacement Electric Motor | USD 24.99 | Fan or trimmer duty |
Decision matrix
- 3 HP, three-phase, variable-speed mill head: the VSM3 is the motor to measure against your mill's bolt pattern and shaft length.
- 1/3 HP, 115V, two-speed shop replacement: the D1092 offers a direct replacement-style path if the D1092 crossover matches your equipment.
- OEM part-number match for Broan-Nutone equipment: the 99080483 keeps the replacement in the Broan family with compact dimensions.
- 60-watt, 110V, single-phase fan/trimmer: the YYF96-60-6 is the low-output, light-duty option.
Product notes
Broan-Nutone 99080483 Replacement Motor, Broan
The Broan-Nutone 99080483 is an OEM replacement motor, and the part number is the compatibility key. With a listed depth of 6.400 inches and a length of 6.800 inches, it is one of the more compact motors in this group, which makes it a reasonable fit for an enclosure or space already sized for the Broan unit. If your equipment calls for the 99080483, this is a clean replacement path. The flip side is that the listing leans on the OEM part number rather than a standalone horsepower or RPM spec, so it is best used when you already know this is the right crossover for your existing motor.
REPLACEMENT MOTOR for Bridgeport type IMPORT MILL 3HP 3PH variable speed VSM3
The JIN SHIN VSM3 is the only three-phase motor in this comparison and the only one aimed at a Bridgeport-type import mill head. The listing describes a 3 HP variable-speed motor with the drum switch and pulleys included, along with a 100L frame, a 6-inch shaft, and both two-bolt and four-bolt hole patterns. The practical benefit is that you are getting a relatively complete motor package rather than a bare component. The limitation is that the three-phase electrical requirement means your shop must already have three-phase power or a converter, and the physical package is sized for a mill head rather than a light-duty fan.
D1092 OEM Direct Replacement Motor 1/3 HP 1675/1080 RPM
The D1092 covers the middle of the replacement spectrum with a 1/3 horsepower rating, 115V voltage, and two speed points in one motor. The 1675/1080 RPM pairing gives the motor a dual-speed personality, which is useful if your equipment needs that range rather than a single fixed speed. The listing presents the motor as an NBK replacement for Fasco, so the crossover identifier is the D1092 part number itself. That makes it a practical pick when you already know the D1092 is the number your equipment uses. The limitation is that the direct replacement positioning is built around the D1092 crossover, so it is best when that part number already matches your equipment.
YYF96-60-6 60watt 110V 60hz 1.0A Replacement Electric Motor
The YYF96-60-6 is the light-duty entry point: a 60-watt, 110V, 60Hz single-phase induction motor rated at 1.0A and 1250 RPM. For a fan or trimmer that needs a small AC motor, this is a straightforward replacement that can run on standard 110V shop power without the phase complications of the mill motor. The trade-off is output. 60 watts is a small fraction of the power available from the 1/3 HP D1092 or the 3 HP VSM3, so this motor is not suited to machine-tool work. Keep it in the fan/trimmer role and it fits the intended duty cleanly.
Final recommendation by use case
- Bridgeport-type import mill head with three-phase power: the VSM3 is the motor to match against your mill's bolt pattern and shaft length.
- 115V shop replacement where 1/3 HP and two speed points are the target: the D1092 is the relevant option.
- Broan-Nutone application where the 99080483 part number is the reference: the Broan replacement keeps the OEM identification in place.
- Low-output fan or trimmer motor that runs on 110V: the YYF96-60-6 is the single-phase choice.
