Choosing an industrial motor isn't just about horsepower; you need to match voltage, phase, speed, and the physical mounting to the job. With four Baldor and Baldor-Reliance options priced from $275 to $700, the right choice depends on your existing power supply and whether you need extra gear reduction. This guide compares the most useful specs of each motor so you can see the tradeoffs at a glance and pick the one that fits your application.
Quick Take
If you want the lowest upfront price, the Baldor-Reliance RL1324A is the entry point at $275. The Baldor-Reliance VBM3554-S sits at $375 and offers a more substantial motor. The New Baldor 0962-28 is $395, and the Baldor-Reliance VEM3558T with Dodge Quantis is the $700 top-priced package. The $425 difference between the cheapest and most expensive options reflects the extra hardware in the top package, so it's not just about price.
Price Comparison
Prices are in USD. The range spans from $275 to $700.
| Motor | Price | Price Bar |
|---|---|---|
| Baldor-Reliance RL1324A | $275 | |
| Baldor-Reliance VBM3554-S | $375 | |
| New Baldor 0962-28 | $395 | |
| Baldor-Reliance VEM3558T + Dodge Quantis | $700 |
Decision Matrix
| If your priority is... | Choose... | Why it fits |
|---|---|---|
| Lowest cost | Baldor-Reliance RL1324A | Entry-level option |
| Higher output | Baldor-Reliance VBM3554-S | More capability |
| New condition | New Baldor 0962-28 | Only new listing |
| Integrated speed reduction | Baldor-Reliance VEM3558T + Dodge Quantis | Includes reducer |
Use the matrix to find your main priority, then jump to the matching product note below. Each note gives you the concrete specifications to confirm the choice.
Product Notes
New Baldor 0962-28
This motor is the only one in this group listed as new rather than new open box. It's a three-phase motor with a 1/4 HP rating and a 1425 RPM speed, so it fits a specific low-power slot in a three-phase system. The tradeoff is the low output-1/4 HP is the smallest rating here, so it's not for anything demanding. You'll also need three-phase power available, since it won't run on a single-phase supply. The new condition makes it a good pick if you prefer unused equipment. If you're replacing a motor on a small pump or a light conveyor, this could be the match you need, as long as your power supply is three-phase.
Baldor-Reliance RL1324A
This is the only single-phase motor in this lineup, running on 115/230V. It's rated at 3/4 HP with a 1725 RPM speed, making it a common replacement for workshop equipment. The open enclosure means it needs a clean, dry spot away from dust and moisture. Full-load amps are 10/5, so the current draw changes depending on whether you use 115V or 230V. The limitation is the phase: if your application is three-phase, this motor won't work. For many home workshops and light machinery, the single-phase setup is the most convenient option because it plugs into standard residential power. Just be sure the open enclosure is acceptable for your environment.
Baldor-Reliance VBM3554-S
This three-phase motor is rated at 1.5 HP and 1755 RPM, with a 56C frame and TEFC enclosure. It accepts 208-230/460V power, giving flexibility for different three-phase services. The TEFC housing protects against dust and light moisture, and the specs list it as a synchronous motor. The catch is that it requires three-phase power; a single-phase panel won't suffice. It also arrives as a new open box, so the packaging may show signs of handling. This motor is designed for three-phase industrial service.
Baldor-Reliance VEM3558T + Dodge Quantis Speed Reducer
This package pairs a Baldor-Reliance Super-E motor with a Dodge Quantis right-angle helical-bevel reducer. The motor is a three-phase TEFC unit, and the reducer offers a 5.65:1 ratio with 1019 in-lbs of maximum output torque. That gives you a ready-to-run geared motor in one assembly. The limitation is the fixed reduction ratio: it's made for a specific speed range, and changing it would require swapping components. Also, the motor is a new open box item, so packaging may be imperfect. If you need a motor and gearbox in one unit, this saves you from sourcing parts separately.
Final Recommendation
Narrow down your choice by matching the motor to the electrical service and physical space you have. Use the decision matrix above to identify the option that matches your main priority, and read the corresponding product note for the specifics. Once you've confirmed the electrical requirements and mounting, you'll know which motor to order. The table and notes together give you the full picture, so pick the motor whose specs align with your equipment and your power supply.
