Browse by everyday use case, then check fit, tradeoffs, and details worth confirming before you open a seller page.
Four industrial motors from $83.99 to $1,499.99, covering direct replacement, belt drive, pump-style variable speed, and 3-phase mill duty. Compare speed, voltage, and fit before you buy.
Need an industrial motor? This guide lines up a 1 HP WEG, a Baldor, a Gast motor/pump, and a Vixen Horns siren-voltages from 120V to 660V, prices from $279.96 to $574.95.
Compare four very different industrial motor replacements spanning $24.99 to $1,499.99: a 3HP three-phase mill motor, a 2.25 THP variable-speed motor, a 1/2 HP belt drive motor, and a 60W fan/trimmer motor.
The Vixen Horns VXS-1450AR is a 120V electric motor siren with a red metal housing, 4-bolt mounting base, and IP44 limited water resistance. This review covers who it suits, the key specs, and the wiring trade-offs.
A practical review of the 2 HP 56C Frame TEFC three-phase motor at $176.80, covering 230/460V wiring, C-face mounting, and the speed discrepancy to watch for.
A practical look at the NBK D1092 1/3 HP dual-speed motor: who it fits, what makes it stand out, and whether $83.99 delivers value for your blower repair.
This review breaks down the 1800 RPM 5 HP, 184T frame TEFC motor's severe-duty features, dual-voltage wiring, and real trade-offs for three-phase shops-starting at USD 330.95.
A focused look at the 3 Phase 56C Frame 1800 RPM TEFC 230/460V 2 HP motor, including who it suits, the specs that stand out, and the non-reversible rotation trade-off.
This 5 HP single-phase 184T-frame motor is priced at $455 and aims to be a direct replacement for air compressor duty. Here's who should consider it and what to watch out for.
The Broan-Nutone 99080483 Replacement Motor is a new OEM part priced at $114.99, measuring 6.8 by 6.4 inches. This review explains who it suits and what trade-offs matter.
This Baldor-Reliance CNM3457 review examines the TENV design, 0.33 HP output, 3450 RPM speed, and open-box condition to see if it's the right three-phase motor for dusty shops.
An honest look at the new Baldor 0962-28 industrial motor: 1/4 HP, 1425 rpm, three-phase design, and a $395.00 price-plus who should buy it.
This open-box Gast 1000055624 industrial electric motor/pump is new and functional, but the listing leaves the intended application unclear. Here's what stands out, who it suits, and the trade-offs to weigh before purchasing.
A factory-matched Baldor-Reliance NEMA C-Face motor and Dodge Quantis right-angle reducer with a 5.65:1 ratio, 1,019 in-lbs of output torque, and TEFC three-phase power-review this $700 open-box industrial motor package for your application.
Need a dependable 1/2 HP replacement for a belt-driven system? The Century OTEB2054AV1 runs on 115V, spins at 1725 RPM, and comes in a 56Z frame with an open enclosure. Here's what makes it a practical pick and where the trade-offs lie.
The YYF96-60-6 is a 60W, 110V, 60Hz single-phase induction motor designed for fans and trimmers. At $24.99, it offers a straightforward replacement path-provided your application matches its 1250 RPM and six-wire layout.
If you need a replacement belly band bracket for a 5-1/2-inch direct-drive blower motor, the Fasco FM55-style MB55 bracket at $18.99 is a focused, ready-to-install option that includes grommets and eyelets.
Four industrial replacement motors are compared here. See which matches your voltage, phase, and mounting style.
Four new industrial replacement motors compared by price and application, from a $24.99 fan/trimmer motor to a $555 variable-speed pump-style motor.
Compare the $395 Baldor 0962-28 1/4 HP motor with the $700 Baldor-Reliance VEM3558T plus Dodge Quantis speed reducer. This head-to-head helps you choose based on price, condition, and included hardware.
Compare the $395 Baldor 0962-28 (1/4 HP, three-phase) with the $275 Baldor-Reliance RL1324A (3/4 HP, single-phase) to match your industrial motor to your supply.
A close look at the Baldor-Reliance VBM3554-S 1.5 HP industrial motor - 1755 RPM, 3-phase, TEFC, and 56C frame - to help you decide if it matches your setup.
A focused look at the 5HP SPL air compressor motor with 230V, 3450 RPM, 56 frame, and 5/8" keyed shaft, listed at USD 128.79.
At the same USD 275.00 listed price, the three-phase TENV CNM3457 and the single-phase continuous-duty RL1324A part ways on power source and enclosure. Pick the motor that matches your service.
A 0.33 HP TENV motor and a 1.5 HP TEFC motor-both Baldor-Reliance, both 208-230/460V three-phase. This head-to-head weighs speed, power, and enclosure design to help you pick.
A four-brush replacement set for OHIO motors, this double-lead kit replaces single-lead brushes and covers many Ohio Motor part numbers. See what it offers and which motor owners should consider it.
Compare a $330.95 3-phase TEFC severe-duty motor and a $455 single-phase ODTF air compressor motor, both 184T 5 HP. See which fits your power supply and use case.
Compare two Baldor-Reliance industrial motor options: a $700 motor-plus-speed-reducer package with 1725 RPM and a $375 synchronous motor at 1755 RPM. Both are three-phase, TEFC, 208-230/460V choices.
A concise look at the WEG 00112ET3H145T 575V 1 HP W22 industrial motor, covering its TEFC enclosure, foot-mounted design, and 1200 RPM output.
A practical look at the 5HP 1750RPM single-phase TEFC motor in a 184T frame, priced at USD 449.99. We break down who it suits, what stands out, and the trade-offs to weigh before buying.
Compare four replacement motors: a Broan bath fan motor with blade, a Bridgeport-type mill motor, and two small fan/trimmer motors. See price gaps and which one matches your application.
Four industrial motors cover a 60W fan replacement, a 160dB alarm siren, an open-box Gast pump motor, and a 2HP three-phase TEFC unit. Compare prices and use cases.
Compare four industrial motors for air compressors and general-duty use, including 3/4 HP, 2 HP, and 5 HP single- and three-phase options. See which frame, speed, and enclosure fits your setup.
Compare four industrial motor listings by listed price, condition, and key specs: a 120V air-raid siren at $156.00, a Gast pump motor at $574.95, a used Baldor base-mounted motor at $600.00, and a 15 HP Dayton TEFC motor at $1,500.00.
Compare the Baldor-Reliance RL1324A's single-phase specs and USD 275 price against the Baldor base-mounted motor's USD 600 price and used condition, then decide which industrial motor matches your needs.
A 5HP 3450 RPM air compressor motor at $141.88 squares off against a reversible 3/4 HP 1725 RPM TEFC motor at $144.06. The right pick depends on your voltage and duty.
A 1HP 750W AC three-phase horizontal gear motor with 1:30 reduction at USD 225.11 for low-speed, high-torque industrial needs. Three-phase requirement and horizontal mounting are key factors to weigh.
Choose between a compact Dayton 1/3 HP motor, a 15 HP three-phase TEFC Dayton, a 120V alarm siren, and a Gast motor/pump by matching the listed format, power details, mounting, and condition to the job.
Choose the 5 HP 184T air compressor motor for substantially higher horsepower and a 208-230V setup, or the 3/4 HP 56C motor for 115/230V flexibility, a specified keyed 5/8-inch shaft, and reversible rotation.
The Baldor-Reliance RL1324A is a 3/4 HP single-phase industrial motor at 1725 RPM with a NEMA 56 frame, open enclosure, and continuous-duty rating. This review looks at its specs and $275.00 price for replacement and light industrial use.
Four new replacement motors span from a $22.99 Broan Nutone bath fan motor to a $1,499.99 mill motor. This guide matches each unit to the right machine, with price bars, specs, and a decision matrix.
Comparing the Baldor-Reliance VBM3554-S (USD 375.00) with the Baldor Industrial Base-Mounted motor (USD 600.00). The VBM3554-S offers detailed three-phase electrical specs, while the base-mounted Baldor adds a bracket and a used condition. Choose based on spec detail versus mounting convenience.
Match horsepower, phase, voltage, RPM, and frame before comparing listed prices. This guide separates a 15 HP three-phase Dayton, a 3 HP TEFC motor, a 0.75 HP single-phase Baldor Reliance, and a 1/3 HP inverter-duty Dayton.
Both are 230/460V, three-phase, TEFC industrial motors, but the Dayton is a 15 HP 254T-frame choice while the OE Quality motor is a 3 HP 182T-frame option. Choose by required output, frame, and listed price.
The VSM3 is a 3HP three-phase replacement motor for import Bridgeport-type variable-speed mills. It includes pulleys and a drum switch, but bolt-hole spacing and a 6-inch shaft need to match your machine. Understand the fit before buying at $1,499.99.
Compare four Baldor and Dayton industrial motors across power, phase, and condition-from a used .75 HP single-phase motor to a 15 HP three-phase TEFC open-box unit.
Compare four three-phase industrial motors from 3 to 15 HP, priced $332.63 to $1,500, and match frame size, RPM, and duty rating to your equipment.
From a vintage 1/100 HP motor to a 15 HP Dayton three-phase unit, these industrial motors cover very different jobs. Use the listed-price comparison and spec-by-spec matrix to find the right one.
Need a new three-phase Baldor motor or a used base-mounted one? Compare the 5F604-1709's 5 HP, 460V AC specs with the Baldor Industrial Electric Motor Base-Mounted with Mounting Bracket Gray.
One is a 3 HP premium-efficiency motor with a 1.25 service factor; the other is a 5 HP severe-duty motor with 1.15 and a lower listed price. Both are 1800 RPM, three-phase TEFC motors at 230/460V.
Finding more guides for you…